Standard Bath

Baths are available in various shapes and sizes. You can choose between standard straight baths, shower baths, or Standard bath. While all of these a great for specific bathroom layouts and needs, installing them may differ slightly. A Standard bathtub directly stands on the floor and may or may not have paws. These may be relatively easier to install as DIY than standard baths.

If you are planning to install a Standard bath? and want to know how to do it yourself, you are at the right place.

In this article, we will explain the step-by-step process of installing a Standard bath.

Pre-Installation Checks

Before you even plan for a bathtub installation, it is important that you unpack and check that all the items that you have received are the right ones, don’t have any damage, and are what you have ordered. It is better to perform such a check at the time of item arrival, so you have enough time in case of any return or replacement of the item. You should not proceed with any installation process if anything is defected or missing from the package.

Before You Start Installation.

A word of caution before you even start the installation. It is important that you handle the installation process with care. You should make sure that your bath doesn’t get scratches, cracks, or any other type of surface damage during the installation. Installation is not covered under manufacturer warranties. Therefore, most bathroom retailers don’t accept any claim of damages during and after the installation process. You should make sure that your installation complies with building code regulations set by the UK’s local government.

Things You Will Need for a DIY Standard Bath Installation.

  • New Bathtub with Accessories
  • Caulk Sealant
  • Silicon
  • Level Tool
  • Measuring Tap
  • Wrench

Step by Step Standard Bath Installation Process

Here are a few steps that you will need to complete the bathtub installation.

  • Step 1. The first thing that you will need to begin with the installation process is to remove the bath from its packaging and place it in the correct position for the installation. Make sure that your bath does not come in contact with a surface that scratches or damages it. You should place it on the carpet or cardboard during the installation process.
  • Step 2. If your bath comes with feet, turn them to make your these leveled at around 4,5 mm above the floor level. There should be a gap between the floor and the bath shell. If you try to install it directly onto the bath floor, it will create pressure on the bath, resulting in cracks. The perfect leveling will ensure all the water can easily drain into the waste outlet.
  • Step 3. Once in the right position, tilt the bath a little on a side and connect it to the drain outlet. There are various types of connectors available in the market. It should be recommended by your bathroom retailer. You will need this connector in perfect size with the correct length so it can easily be adjusted in the drain space under the bathtub.
  • Step 4. You must screw fully to fix the drain spot. Once it is done, it’s time to test water for leakages and check the drainage. In order to do it, you will need to fill the Standardbath fully with water and check how easily water flows through the waste outlet. Make sure that there is no water dripping out of the drainage.
  • Step 5. To finish off the installation, you should apply a thick layer of silicone around the bath base and the floor. Let it rest for at least 24 hours before you start the use of a Standard bath regularly.

How to Care for Your Standard Bath After Installation?

After installation, care for your Standardacrylic bathtub will ensure long-term use without any problems. It is important that you don’t expose your bath to naked flames or cigarettes or clean it with harsh chemicals. You should start filling your bath with cold water and let it gradually warm or hot to let the surface adapt to the temperature change. Regular cleaning and maintenance with a soft cloth and warm soapy water will prevent any marks and scuffs on the polished surface. If you see any marks on the surface, you can use fine polish to remove and repair them. You must only use cream cleaners to remove stubborn marks.

Apart from this if you are interested to know about Stormwater Drain Repair and Clog Prevention then visit our Business category.